Archive Joining Technology

2018

Jousset, P.: FE Simulation von strukturellen Epoxy Verklebungen anhand des TAPO Modells, CADFEM ANSYS Simulation Conference, Rapperswil, 2018

2017

Jousset, P.: Auslegung und Prüfung von Multimaterialbauteilen, 12. Rapperswiler Kunststoff-Forum, HSR Hochschule für Technik Rapperswil. 07.09.2017

Hofer, T., Gmür, S., Vetter, D., Steffen, C., Jousset, P.: Improvement of the mechanical properties of adhesive joints using power- ultrasound as pre-treatment, AB2017 4th International Conference on Structural Adhesive Bonding, Porto, 6-7.07.2017

Bürgi, M., Steffen, C., Jousset, P.: Characterisation and FE simulation of elastic bonded joints under complex loading, , AB2017 4th International Conference on Structural Adhesive Bonding, Porto, 6.-7.07.2017

Jousset, P.: Finite Elemente Simulation des Bruchverhaltens von struktutellen Klebverbindungen, Meeting des Akademischer Aviatikverein Zürich, ETHZ, 28.02.2017

Jousset, P.: Prüfung und FE Simulation des Ermüdungsverhaltens verklebter Strukturen, VPE Swiss Workshop  - Von Anwendern für Anwender «Langzeitverhalten: Möglichkeiten der numerischen Simulation», HSR Rapperswil, 19.01.2017

2016

Jousset, P.: Latest development at the IWK in polymers, composites and bonding technologies, The 2016 Annual Meeting of Chinese Association of Materials Science and Energy Technology in Switzerland, University of Zürich, 03.12.2016

Dang, W., Jousset, P., Rachik, M.: Finite Element, Simulation of Weld-bonded Joints, China International Bonding 6, 17.-18.10.2016

Jousset, P.: Sample preparation for the mechanical testing of adhesives, Mixpac TECDAYS 2016 Zürich, 29. September 2016

Jousset, P., Bürgi, M.: Kleben in Theorie und Praxis Teil 2: Prüfung und FE-Simulation von 1-K-Polyurethan-Klebstoffen, 11. Rapperswiler Kunststoff-Forum, 01.09.2016, HSR Hochschule für Technik Rapperswil

2015

Jousset, P.: Modellierung von Bruch- und Versagens-Mechanismen von Klebstoffen, Swiss VPE-Workshop, HSR Hochschule für Technik Rapperswil, 18.06.2015

Jousset P.: Auslegung von Klebeverbindungen - Von der Handrechnung zur FE-Simulation, Seminar: Entwicklung von Kunststoffbauteilen, HSR Hochschule für Technik Rapperswil, 19.05.2015

2014

Jousset, P.: Finite Element simulation of elastic silicon adhesive joints for glass bonded structures, 12. ESG conference, 2014, Parma, Italy

Bidaud P., Créac'Hcadec R., Thevenet D., Cognard J.-Y, N. Carrère, P. Jousset, A prediction of the cyclic behaviour of adhesively bonded structure under fatigue loading, 10th European Adhesion Conference EURADH, Alicante, Spain, 2014.

W. Dang, P. Jousset, M. Rachik, Weld-bonded joints properties with advanced high strength steel DP600, ICMSE 2014, Shanghai, China.

2013

P. Bidaud, D. Thevenet, JY. Cognard, P Jousset: Comportement d'une colle structurale sous chargement cyclique: application aux structures composites collées, 21ème Congrès Français de Mécanique, 26 au 30 août 2013, Bordeaux, France (FR)

P. Bidaud, R. Créac'Hcadec, D. Thevenet, P. Jousset, JY. Cognard: A strategy for fatigue life prediction of adhesively bonded structures under cyclic loading conditions, 2nd International Conference on Structural Adhesive Bonding

P. Bidaud, R. Créac'Hcadec, D. Thevenet, JY. Cognard, P. Jousset: Analyse du comportement de structures composites collées sous chargement cyclique de traction/compression-cisaillement, 18e Journées Nationales sur les Composites, xxx

P. Jousset, N. Arnaud: Finite element simulation of structural adhesive bonding under dynamic loading, constitutive model, parameters identification and validation on an industrial benchmark, ACEX 2012 (6th International Conference on Advanced Computational ...)

W. Dang, P. Jousset, M. Rachik, Failure prediction of weld-bonded joints with FE simulation, ACA-CIB 2013, Beijing, China

P. Jousset, Finite Elemente Berechnungen verklebter Strukturen, 4. VPE Swiss Symposium, Rapperswil, Switzerland

W. Dang, P. Jousset, M. Rachik, A detailed modeling for fracture simulation of spot welds in advanced high strength steel DP600, CFRAC 3., 2013, Pragues, Czech Republic

2012

P. Jousset, FE-Simulation von strukturellen Klebverbindungen für Crash Berechnung: Modellierung, Parameteridentifikation und Validierung, CrashMAT 2012, Freiburg, Germany

P. Jousset, N. Arnaud, FE-Simulation of structural adhesive bonded joints under dynamic loading. Validation on an industrial benchmark, ACEX 2012, Istanbul, Turkey

P. Bidaud, R. Créac’hcadec, D. Thévenet, J.Y. Cognard, Analysis of the cyclic behaviour of an adhesive in an assembly under tensile-shear loading, EURADH 9., Friedrichshafen, Germany, 2012

2011

P. Jousset and M. Rachik, Finite Element Simulation of the fracture behaviour of structural bonded joints in industrial applications, 6th international conference on fracture of polymers, Composites and Adhesives, 11-15/09/2011, Les Diableret, Switzerland

P. Jousset and M.Rachik, Identification and Evaluation of an Elasto-Plastic Damage Model for the Finite Element Simulation of Sructural Bonded Joints, ACE-X 2010, Paris

P. Jousset and M.Rachik, Kohäsivzonenmodell für die Finite Elemente Simulation von strukturellen Klebverbindungen: Modellierung, Parameteridentifikation und Validierung, NAFEMS Konferenz, 28-29. April 2010, Wiesbaden

P. Jousset, S. Koch and M.Rachik, Process and structural simulation of Adhesives, Conference “Fügen im Karosseriebau« in Bad Hauheim 20/04/2010

2009

D. Lootens, P. Jousset, R. J. Flatt, P. Hébraud, Quantifications de tests industriels: de l’étalement à la queue du chien, 44. GFR, 2009, Strasbourg

P. Jousset and M.Rachik, Evaluation and Identification of Damage Models for the Finite Element Simulation of Sructural Adhesives, ACE-X 2009, Rome

P. Jousset and M.Rachik,  Elasto-Plastic Constitutive Model for Finite Element Simulation of structural Adhesives, Simulia Customer Conference 2009, London

2008

P. Jousset and M.Rachik, Evaluation of elasto-plastic constitutive models for Finite Element Simulation of structural adhesives, Euradh 2008, Oxford

P. Jousset and M.Rachik, Development of an Inverse Identification Procedure to Evaluate Material Constitutive Parameters for the Finite Element simulation of Structural Adhesives, EHTC 2008, Strasbourg

P. Jousset and M.Rachik, Simulation par éléments finis du comportement des adhésifs structuraux : Identification de modèles constitutifs appropriés, Séminaire « Graines d’Adhésion » 2008, Bordeaux

2007

P. Jousset, M. Rachik and S. Koch, FE-Simulation von strukturellen Verklebungen, Konstitutive Modelle für Plastizität, FTK 2007, Bremen

P. Jousset, D. Lootens, N. Roussel, RJ. Flatt: Rheology of penetrations tests I: theory and finite element simulations, Proc. 12 th ICCC, July 8-13, 2007, Montreal, 1-12

2003

P. Jousset, M.Schemat, Link S., Application of shape optimization in occupant simulation, 4. European Madymo user conference 2003, Brussels